Protect your data by blanking the host display during a remote
On the Remote Control toolbar, click
Options > Blank
You can turn this feature on or off at any time.
If prompted, install the
DPMS driver (Display Power Management Services)
This happens the first time you use the screen blanking feature
on the host.
Not all monitors, video cards, motherboards, or BIOS
support DPMS. Check with your hardware vendor if you experience problems with
the DPMS driver. In case of incompatibility, you may not be able to use this
feature with some host computers.
Anyone at the host device sees a blank screen on the physical monitor
while the remote session is active.
Tip: When you connect to a computer for the first time, you
are presented with the option to automatically blank the remote screen during
all your future sessions. To change your remote control preferences, click
Blank Screen in the toolbar.