The Hamachi mobile client gives you access to Hamachi networks
from an iOS or Android smartphone or tablet.
The mobile client is deployed by sending the required VPN settings in
a configuration file via email; it is not an app you download from a store.
Follow these steps to configure mobile client settings and send them
On the LogMeIn web site, switch to Networks
Add Client page is displayed.
Add mobile client and click
Client Name and add the client to a network
(optional) and click
Edit Client page is displayed with the new
client displayed on the
To send the default configuration to an email recipient, enter an
email address and click the appropriate button for the user's operating system.
Otherwise, change settings before sending.
Tip: To preview the configuration file, click
Preview iOS Config or
Preview Android Config, as appropriate. This
helps you understand what the user sees on their device when configuring their
Add the client to a network under
Network ID and
Important: A mobile client must be in a network to go
Connection protocol, choose how the device
will connect to Hamachi servers. Minimum one selection.
Optional connection settings:
Send all traffic over VPN
Valid for all network types.
When applied to a
gateway network, the gateway peer relays all outside traffic.
When applied to
mesh or hub-and-spoke networks, the device's traffic to the public Internet is
not relayed by other members. This means the device cannot connect to the
This setting is
always applied to Android devices that use a PPTP connection.
To retain an
Internet connection on an Android using PPTP in a mesh network
In a mesh
network, set the
Forwarding Route to
In a gateway
network, the forwarding route must match the client's assigned IP range
Set gateway peer to filter broadcast
Filter out network packets not specifically directed to the
Enable on-demand connection to these
When an iOS device connecting via IPSec attempts to reach a
listed domain, the VPN connection will be activated.
To save changes to the configuration file, click
Remember: For iOS, if you change settings after sending
the configuration file, you must send a new version.
Once the recipient
opens and installs the emailed configuration, the client becomes an attached
member of the active LogMeIn account.
You will be able to manage this client using the
LogMeIn website. The recipient gains access to your shared
resources. For example, you can use Hamachi to give mobile users access to your
corporate LAN, internal webservers, file servers, etc.